Hexavalent Chromium (Cr(VI)) Safety Training

Training for Toxic and Hazardous Substances—Hexavalent Chromium (Cr(VI))

As per the Occupational Safety and Health Administration (OSHA) - 29 CFR 1910.1026(l), Training for Toxic and Hazardous Substances—Hexavalent Chromium (Cr(VI)) is mandatory. Generally, this training provides awareness about the hazard and make the workplace safer.

Himaya Prevention Private Limited have a large portfolio of qualified and highly experienced trainers to provide training at your site.

Targeted Audience for Toxic and Hazardous Substances—Hexavalent Chromium (Cr(VI)) training:

Employees exposed to Cr(VI) in all its forms and compounds at or above the PEL:

In addition to HazCom training, train on all the subjects described in the rule and the medical surveillance program.

Frequency of Toxic and Hazardous Substances—Hexavalent Chromium (Cr(VI)) training:

This training is generally recommended

You may plan it at your site with our expert trainer. Kindly contact us now to get the best suitable quotation to proceed further.

Common terms are used in Toxic and Hazardous Substances—Hexavalent Chromium (Cr(VI)) Training Session.

Action level

An airborne level, typically one-half of the PEL designated in OSHA’s substance-specific standards, 29 CFR 1910, Subpart Z , calculated as an eight (8)-hour time-weighted average, which initiates certain required activities such as exposure monitoring and medical surveillance.

Ceiling Limit

The exposure limit a worker’s exposure may never exceed.

Sampling and Analytical Error

A statistical estimate of the uncertainty associated with the given exposure measurement.

Short-Term Exposure Limit (STEL)

The average exposure to a contaminant to which a worker may be exposed during a short period (typically 15 – 30 minutes).

Time-Weighted Average (TWA)

The average exposure to the contaminant over a given period of time, typically 8-hours. For examples of how a TWA is calculated, see the OSHA Technical Manual.